Source
The right parts, from suppliers we’ve worked with for years — relationships that hold, brands we can name, and no surprise substitutions.
Solutions
Turnkey PCB assembly, box build and NPI, under one roof.
Assembly is the core: we source, build, test and ship your boards — and your product — with one accountable project manager. Component sourcing, design help, embedded firmware and a stage-gated NPI path are there when the project needs them.
Turnkey PCB assembly1 2 3 4
Everything between your design and a working board.
Assemble
SMT and through-hole assembly on a professional line, watched at every step and scaled up when you need volume.
Test & inspect
Functional testing and inspection before anything ships.
Deliver
Boards that work, packed and delivered on schedule, with your project manager on hand if anything needs sorting out.
No minimum order, and a single prototype gets the same checks as a volume run. Prototypes typically turn in 5–7 days, production 7–10 once materials are ready — your quote states the real timeline up front.
Low-volume & high-mix assembly
50 boards or 5,000 — the same standard.
Prototype runs, pilot batches and recurring small orders are where the big factories lose interest — and where we do our best work. Low-volume and high-mix PCB assembly runs the same ten-stage QA pipeline as volume production: AOI, X-ray and functional test on every board, full MES traceability, and a named project manager who answers in English.
No minimum order — from one piece. Prototypes typically turn in 5–7 days; recurring runs get a standing build plan, so reordering is an email, not a new project.
Get a quote
Component sourcing & BOM
We source against your bill of materials from suppliers we’ve used and vetted. Before any part goes on order, we run a risk check: long lead-times, supply constraints, lifecycle concerns. Alternatives are always raised with you, never slipped in quietly. Your BOM as you agreed it is the BOM that goes on the line.
Learn more
Design & engineering support
Most clients come to us with a finished design, and that suits us fine. Where the project needs it, we’ll do a DFM review — flagging anything that fights the assembly process before a single part is bought. We can also help with circuit design or PCB layout on boards that are still in development. We don’t put a fee-heavy front door on this. If design help makes the outcome better, we’ll do it.
Learn more
Software & firmware
When a product needs firmware alongside the assembly — a microcontroller application, a peripheral driver stack, a hardware bring-up routine — we can write or complete it as part of the same project. The same applies to supporting desktop or server-side software where the hardware needs it. We’re honest about scope: we take on what we can do well.
Learn more
Box build assembly
Box build is the whole product, not just the PCB: enclosure, cabling and harnesses, final assembly and packing. We produce the structural parts — enclosures, brackets, mounting plates, connector cutouts — and the same team that builds the board handles the housing, so the two fit from the start. For prototype and pre-production quantities we 3D-print parts in-house; the same build then scales to production. For product teams who want one partner to answer for the finished unit.
Learn moreNew-product introduction (NPI)
A hardware team with a product concept can take the whole journey with us. Four stage-gated phases, each with defined tests and sign-off criteria, move a design from idea to mass production without changing partners at each step.
Concept analysis & functional prototype
We review the concept for technical and commercial viability. A functional prototype is built, put through initial functional and safety tests, and assessed against the specification.
Process prototype
The design is confirmed manufacturable at the target scale. A process prototype is built using production materials and methods. EMC, reliability and parts-quality reviews run at this stage.
Small-batch trial
A limited production run validates the process under real conditions. Yield, consistency and documentation are assessed. The gate criterion is a stable, repeatable process.
Mass production
Full-rate manufacturing against an approved process, locked BOM and signed-off test specification. Each batch runs the same QA pipeline as every other board we build.
Dedicated English-speaking project manager
One point of contact. Clear updates, fast responses, issues solved.
Honest alternatives, openly discussed
We explain trade-offs and recommend what's best for your product.
Design help when it genuinely improves the outcome
Practical suggestions that improve reliability, cost and manufacturability.
Send us your design or your questions.
Files, a rough spec, or just a problem to talk through — you’ll reach a dedicated project manager who speaks fluent English and runs the job.